How to Cut Laminate Flooring

The installation of the laminate floors is an achievable option for the homeowners but most of them struggle with the cutting and trimming. Well, it is a fact that at times, the cuts on the planks need to be super precise and hence you have to be in the practice and have some basic skills to get that correct. 

In today’s article, we will try to provide you with all the necessary information required to cut the laminate flooring starting from the tools required to the techniques to cut and trim the planks. 

So, are you ready to do a crash course on laminate floor cutting? If yes, then let us start.

Essential Tools Required to Cut Laminate Flooring

Different tools perform different functions. So, if you want to cut the laminate floors, you will need to buy some of the most common and essential equipment to make your work easy. 

  • Table saw – This is perfect for making straight cuts.
  • Circular saw – This is one of the best tools for shaping laminates.
  • Handsaw – This is useful if you have a problem handling an electric saw as here you can control the blade direction fully.
  • Multi-tool – This is great for straight lines.
  • Miter saw – This is good for crosscuts.
  • Jigsaw – This is perfect for making curves and angles. 
  • Utility knife – This will come in handy while cutting the tiles. 
  • Scissors- Although not very ideal but some use scissors to separate the materials. However, this will only work if your scissors are properly sharpened. 
  • Pencil or chalk – Before cutting you need to make markings and for that, keeping a pencil or chalk nearby is a must. 
  • Measuring tape – You will need it for measuring.

A Complete Guide to Cutting Laminate Flooring

Some technicalities are involved in cutting the laminate floors. Below are some things that you need to keep in mind.

1. Cut the boards

When you are cutting the laminate boards, it is important that you remain very careful because the boards can chip easily. To get things done correctly, the first measure and do the markings on the board using a pencil or chalk. The board must be kept in the proper position with the help of a clamp or stand. Then with the help of a circular saw or table saw, make long straight cuts. As far as angels go, a jigsaw or a utility knife will be helpful. Remember to wear gloves, a mask, and goggles throughout.

In order to cut the material lengthwise, you need to follow the same process. You just have to ensure that there are stands or clamps to support both ends of the board so that you can make the cut without the boards moving or falling.

2. Cut the tiles

The laminate tiles need to be cut in a straight line just like the floorboards. First, make all the markings using a pencil. Then hold the tile steady with the help of clamps and make long incisions using a utility knife. This also requires you to wear gloves, a mask, and goggles.

3. Cut flooring after installing

Many times, people realize that they need to make another cut after they have already installed the laminate. This is a little tricky as you may end up damaging the subfloor accidentally but with little care, it is achievable. 

Here also, you need to mark after measuring using a pencil. Then after putting your gloves, mask, and your goggles on, adjust the blade of the circular saw to almost the same as the board thickness but not fully. The trick is to keep it slightly thin to avoid causing damage to the subfloor. Then make clean incisions. It is suggested that you keep some extra material in case you make a mistake.

4. Work with the edges carefully

When you are working with the edges and the trims, the main thing that you need to consider is to leave spacers in between the wall and the laminate. The common mistake that most people make is that they forget that a certain amount of space needs to be kept for the trim to get installed and instead cut the floor to fit the exact area in the room. 

So, while you are dealing with the trims, measure and leave that space along with an extra one-half inch. In the end, if you see gaps, you can always fill them up. 

Go DIY or Hire Professionals to Cut Laminate Flooring- Which is Better?

It is worth mentioning that hiring a professional in most cases is a smart choice. Not only are they experts in what they do but hiring experts at times costs you less than going DIY. This is because they charge you for the entire project which usually includes bringing their own tools. In contrast to that, if you are going DIY for the very first time, there is a big chance you may make mistakes and you will have to spend extra to rectify those. In addition to that, if you are cutting the laminate flooring for the first time, you will have to spend a handsome amount to buy all the necessary tools required for cutting, and yes, some tools are actually quite expensive. 

Besides all the above, you need to be careful while dealing with the electric saw. Not only can you end up damaging the floor, but you may also hurt yourself during the process. Some saws become weak and dangerous over the course of time. To avoid that, you will have to buy ones having hardened blades which are usually found in high-end models which at the end of the day may become expensive for you. Also, if you do not have so much time to invest in the entire project, then hiring professionals is very much recommended. 

Conclusion

Hiring a professional is ideal in most cases but if you are confident in your skills, you can always go DIY. But for those not that confident, please consider all the pros and cons before making the decision.